[Chris Salter working at his installation in the Exhibitions Gallery of the Art Centre. Photo:LABoral/Sergio Redruello] n-Polytope: Behaviors in Light and Sound after Iannis Xenakis - A performance-installation by Chris Salter in collaboration with Sofian Audry, Marije Baalman, Adam Basanta, Elio Bidinost and Thomas Spier :: until September 10 :: LABoral, Los Prados, 121, 33394 Gijón, Spain.

n-Polytope: Behaviors in Light and Sound after Iannis Xenakis is a contemporary re-imagining of the Greek composer and architect Iannis Xenakis’s radical architectural environments called Polytopes (from the Greek poli, ‘many’ and topos, ‘space’). The first of these spaces, articulated through light and sound, was presented at the Expo’67 in Montreal and subsequently in Europe and the Middle East in the 1970s and 80s. Through the temporal dynamics of light and sound, these installations evoke the indeterminate and chaotic behaviour of nature: rivers, clouds, waves and cosmological phenomena. Reinventing these polytopes goes far beyond a simple historical exercise given that they represent seminal works in the history of new media and of which, still to this day are little known outside of contemporary music circles.

Xenakis creation of dense artistic experiences that fundamentally analyse and model the behaviour and patterns of nature and the cosmos in their fluctuations between order and disorder evoke, without doubt, the instability of the present moment. The visitor will thus enjoy a strange, flickering, unstable experience; one of intense beauty achieved by the light and sound-constructed ambience.

Chris Salter and his team of collaborators have worked during his residency at LABoral to bring the final phase of the project to a close: the construction of the performance and installation for the public.

Chris Salter is an artist, Associate Professor for Design + Computation Arts at Concordia University in Montreal and Director of the Hexagram Concordia Centre for Research-Creation in Media Arts and Technology. He studied philosophy, economics, theatre and computer music at Emory and Stanford Universities. After collaborating with Peter Sellars and William Forsythe/Ballett Frankfurt, he co-founded and directed the art and research organization Sponge (1997-2003). His solo and collaborative work has been seen all over the world at such venues as the Venice Architecture Biennale, National Art Museum of China, CTM, Ars Electronica, Meta. Morf in Norway, PACT Zollverein, Todays Art, Villette Numerique, EMPAC, Transmediale, EXIT Festival, Place des Arts, Elektra, Shanghai Dance Festival, V2_, among many others. He is the author of Entangled: Technology and the Transformation of Performance (MIT Press, 2010).

Production: LABoral Centro de Arte y Creación Industrial and LabXModal, Montreal
Collaborating Board Member: Fomento de Construcciones Contratas (FCC)
With the support of: Fonds de recherche du Québec-Société et culture (FQRSC), Canada; Hexagram Concocordia, Canada; Schlaich Bergermann & Partner, Germany; and STEIM, the Netherlands
Concept and Direction: Chris Salter
Composition: Chris Salter and Adam Basanta
Architectural Design: Thomas Spier
Lighting and Laser System Design: Elio Bidinost
Embedded Systems, Micro Light and Sound Design, Media Composition Programming: Marije Baalman
Composition Programming: Marije Baalman
Media behavior modelling and programming: Sofian Audry
Structural Consultant: Schlaich Bergermann and partner/David Sommer
Electronics Assembly: Rene Wassenburg (Schrikdraad Ontwerp) and Stan Verberkt
Openframeworks Laser Mirror Control Software: Samuel Tissot-Jobin

THE COLLABORATORS

Fomento de Construcciones y Contratas (FCC), world leading company in environmental services, infrastructures and renewable energies, is a founding member of the Board of Trustees of the Fundación La Laboral Centro de Arte y Creación Industrial since its formation. FCC has built a large structure comprising three connection points for the suspension of 22 steel cables extending across the exhibition space from a height of five metres to the floor and forming 180-degree angles that occupy eight metres of space on the floor.

This structure, specially designed and built to be easily transportable, is very light which, along with its dismantling into small pieces, will facilitate its use for while n-polytope is on tour at various centres where it will be exhibited.

Fonds de recherche du Québec-Société et cultura [Québec Research Fund for Society and Culture] is a Quebec based organisation dedicated to the development of research and innovation in human and social sciences, arts and humanities. To this end, it financially supports research and the training of experts in these areas with the purpose of promoting the dissemination and transfer of knowledge.

Schlaich Bergermann und Partner is a consulting firm that operates in the classic as well as specialized fields of structural engineering. Their focus lies on light-weight structures in bridge design, membrane and cable structures, glass architecture and all related fields. Open to all kinds of materials as well as to innovations, they look for solutions that suit a building project technically, economically and ecologically.

labXmodal is a studio-lab founded by Chris Salter dedicated to the research, development, and creation of performative environments - physical spaces with a focus on dynamic and temporal processes over static objects and representations.

STEIM (STudio for Electro Instrumental Music) is a centre for research and development of new musical instruments in the electronic performing arts, located in Amsterdam, the Netherlands. Electronic music in STEIM’s context is always strongly related to the physical and direct actions of a musician. In this tradition, STEIM supports artists in residence such as composers and performers, but also multimedia and video artists.

The Hexagram-Concordia Centre for Research-Creation in Media Arts and Technologies based at Concordia University in Montréal brings together artists/researchers from Concordia’s faculties of Fine Arts, Arts and Science, and Engineering and Computer Science within an environment fostering leading edge work in a broad range of interdisciplinary domains relating to new media art, design and technology. Hexagram-Concordia along with its partner centre HexagramUQAM at l’Université du Québec à Montréal are the two pillars of HexagramCIAM, known nationally and internationally as Canada’s largest pole for research-creation in the many intersecting points between art and technology.